2, 3, 5 and 8 TON CAPACITY
Models
76502 - 2 Ton 76503 - 3 Ton 76505 - 5 Ton 76508 - 8 Ton

INTENDED USE
For automotive, industrial, agricultural, marine, recreation and construction applications
where lifting, pushing, spreading, bending, pressing or straightening are required.

FEATURES
  • Two piece zinc plated handle.
  • Prevent rust with "Parkerized" pump piston, ram and extension screw.
  • No leak "Uniweld" construction
  • 50% safety overload factor.
  • State of the art design reduces repair time.
  • Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances.
  • Lightweight forged base provides more steel only where strength is required.
  • Cold headed extension screw and release valve eliminate parts and reduce the chances of breakage and excessive wear.
  • Safety oil by-pass system prevents the ram from being overextended and causing damage to the cylinder.



12, 20, 30 and 50 TON CAPACITY
Models
76412 - 12 Ton 76412G - 12 Ton 76512 - 12 Ton  
76520 - 20 Ton 76520G - 20 Ton 76820 - 20 Ton  
76530 - 30 Ton      
76550 - 50 Ton      

INTENDED USE
For use in heavy duty trucks, farm equipment, building construction, construction and mining equipment, mobile home set-up, oil field applications and as original equipment for manufacturers of many products.


FEATURES
12 and 20 TON CAPACITY

  • Carrying handles in addition to all other features mentioned.
  • "G" models are designed with a removable plug so a gauge or remote pump can be adapted to the jack.

FEATURES
30 and 50 TON CAPACITY
  • All other features mentioned plus a safety overload system which prevents the jack from being used beyond its rated capacity.
  • Removable plug so a gauge or remote pump can be adapted to the jack.
  • 39 1/2" long handle allows ease of pumping.



MODEL 76312
12 TON CAPACITY
STANDARD HEIGHT     		 MODEL 76320
20 TON CAPACITY
STANDARD HEIGHT     		 MODEL 76720
20 TON CAPACITY
LOW HEIGHT

INTENDED USE
For use in heavy duty trucks, farm equipment, building construction, construction and mining equipment, mobile home set-up and oil field applications.
FEATURES
  • Fast efficient air pump reduces lifting time and has a built-in relief mechanism which prevents the jack from being used beyond its maximum capacity.
  • Convenient push button air valve connected to an in-line filter prevents contaminates from entering the air/hydraulic system.
  • Two piece zinc plated handle.
  • Removable handle for shipment or storage.
  • Rust inhibitive coating on ram, extension screw and extension screw.
  • NORCO/KYB "Uniweld" construction.
  • Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances.
  • Lightweight forged base provides steel only where strength is required.
  • Cold headed extension screw and release valve eliminate parts and reduce the chances of breakage and excessive wear.
  • Safety oil by-pass system prevents the ram from being overextended and causing damage to the cylinder.
  • Carrying handle.
  • Note: Models not shown have same basic construction as model pictured.



Click here for dimensions