MODEL 78102A
FLOOR CRANE
2 TON CAPACITY
(Boom retracted)

INTENDED USE
 Designed to raise, lower and transport automobile engines, transmissions, differentials and other heavy loads with minimal effort.
FEATURES
  • Four adjustable legs provide greater stability.
  • Six position telescopic boom with 3/8" proof chain and hook.
  • 3 ton capacity hydraulic power unit provides faster rising action, a large diameter ram to withstand angle loads and an access hole that enables optional pumps to be adapted. Click here for information on pumps.
  • Four full swivel ball bearing caster wheels provide easy maneuvering and positioning.
  • Low profile design (4-3/4" from top of base to ground) allows positioning under low ground clearance vehicles.
MODEL 78106
FOLDABLE FLOOR CRANE
2 TON CAPACITY
(Boom retracted)

INTENDED USE
 Same as the model 78102A
FEATURES
Similar to model 78102A with the following exceptions:
  • Quick foldable legs and boom save shop space and prepare crane for transport or storage within seconds.
  • 4" diameter front wheels and rear swivel caster wheels provide positive steering and easy maneuvering.
  • High strength wheels with roller bearings and polyurethane tread protect shop and display floors.
  • Five position telescopic boom with 3/8" proof chain and hook.

MODEL 78204A
TRUCK CRANE
1/2 TON CAPACITY
(Boom retracted)

INTENDED USE
 Same as the model 78102A but mounts in the bed of a truck or on a loading dock.
FEATURES
  • Four position telescopic boom that folds down for traveling position or storage.
  • 5 to 1 gear ratio winch with 20 foot long 1/4" diameter steel cable and hook pull the load toward the boom.
  • Winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for constant hand pressure against the crank handle.
  • Hydraulically activated boom lifts the load to the desired height.
  • Crane swivels 360 degrees but can be locked in position.

MODEL 78600A
FLOOR CRANE
AIR/HYDRAULIC
3 TON CAPACITY

 MODEL 78605
ELECTRO/HYDRAULIC
3 TON CAPACITY
INTENDED USE
 For lifting heavy items including removal and installation of diesel engines and often their transmissions.
FEATURES
  • Multiple boom and leg extensions provide maximum stability.
  • Boom swivels 10 degrees right or left if base cannot be centered under the load.
  • Floor lock secures crane from moving when in use.
  • Model 78600A includes a foot activated air/hydraulic foot pump requiring 100 P.S.I. air pressure.
  • Model 78605 includes an electro/hydraulic pump requiring 115 VAC.

Note: Click here to see information concerning air and electro/hydraulic pumps.
*Model not shown has same basic construction as model pictured.


Click here for dimensions