MODEL 81022
20 TON CAPACITY
(Each stand)

INTENDED USE
 To stabilize and assist in supporting the front or rear end of a loaded or unloaded tractorless trailer. Sold individually but generally used in pairs.
FEATURES
  • Meets OSHA requirements for supporting trailers when loaded or unloaded.
  • 14" diameter base provides maximum leveling stability.
  • Quick adjust spin handle for ease of turning.
  • Large diamond plate saddle to grip the load.
  • 1-1/2" diameter, grade 5, heavy duty screw and nut provide maximum strength and fine adjustment.


MODEL 81033
3/4 TON CAPACITY

 MODEL 81034
3/4 TON CAPACITY
INTENDED USE
Designed to support vehicle components, not the vehicle. Ideal for exhaust system installation, shock absorber replacement and any task which requires relieving pressure off components.
FEATURES
  • Lightweight, slender design makes handling easy, even in close quarters.
  • Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load.
  • Foot pedal (Model 81034 only) generates 1" additional stroke and 400 pounds of force at the saddle.
  • Pedal may be locked in vertical position for storage or shipment.
  • 1-1/4" diameter acme threaded screw has 26-1/2" of travel.


MODEL 81035
1-1/2 TON CAPACITY

INTENDED USE
 To assist in stabilizing and supporting a vehicle that is raised by an in-ground or above-ground lift.

FEATURES
  • An adjustment pin chained to the stand secures the support column at 6 different height positions.
  • Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load.
  • 1-1/4" diameter acme threaded screw has 6-1/2" of travel for fine adjustment.
  • 5/8" thick rubber saddle pad.


MODEL 81036
1 TON CAPACITY

INTENDED USE
 For replacing exhaust systems, shock absorbers and MacPherson struts. Hydraulic power will assist in freeing frozen spring shackles, aligning wheels and steering gear adjustments.

FEATURES
  • foot activated pump and lowering pedals allow use of both hands to position components.
  • Spring return lowering pedal automatically closes the release valve when foot is removed from pedal.
  • 16" hydraulic travel.
  • Telescopic support tube with nine height adjustments at 2-1/2" increments.
  • A 12" diameter, 3/8" thick steel base provides added stability.



1/2 TON CAPACITY
MODEL 72300

INTENDED USE
An economical jack designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer cases on passenger cars, vans and light trucks that are raised by an in-ground or above-ground lift.
FEATURES
  • Fully adjustable universal saddle with adjustable corner brackets and safety chain.
  • Single stage "Parkerized" ram and pump piston inhibit rust from entering hydraulic system.
  • Wide base with four 3" diameter swivel ball bearing caster wheels, provides stability and easy maneuvering.
  • 3 ton capacity NORCO/KYB power unit provides a large diameter ram for added load stability.



1/2 TON CAPACITY AIR/HYDRAULIC
MODEL 72350

INTENDED USE
Same as the model 72300 but with the added convenience of a push button operated air over hydraulic pump.



100 LBS CAPACITY
MODEL 72508

INTENDED USE
An optional saddle adapter which is used in conjunction with a Norco transmission jack to remove, install and transport (in the lowered position) automobile and light truck fuel tanks and other undercar components.
FEATURES
  • Handles automotive and light duty truck fuel tanks up to 40 gallon capacity. Tanks are to be emptied before handling.
  • Four adjustable support risers with rubber pads protect the fuel tank and can be quickly positioned to fit many shapes and sizes.
  • Includes two load restraint straps.
  • Adapter quickly installs on the following NORCO model numbers: 72050C, 72300, 72350, 72400A, 72500C and 72550.





Click here for dimensions