MODEL 81004B PAIR OF STANDS 3 TON CAPACITY (Each stand)

MODEL 81006B PAIR OF STANDS 3 TON CAPACITY (Each stand)

INTENDED USE
For automotive use where vehicle is to be supported before making repairs. All stands are sold and intended to be used in pairs.

FEATURES U.S. Patent No. 5180131 spring loaded pawl provides constant locking pressure against lifting column. Recessed column saddle for acceptance of vehicle panel rail (model 81004B only). Four legged formed steel base for added strength. Positive lock handle cannot be disengaged until load is off the saddle column. Lock handle can be used as carrying handle.

MODEL 81010A PAIR OF STANDS 10 TON CAPACITY (Each stand)

MODEL 81007A PAIR OF STANDS 7 TON CAPACITY (Each stand)

INTENDED USE
Fleet garages, agricultural and construction maintenance shops. All stands are sold and intended to be used in pairs.

FEATURES Same as model 81006B but four legged base design is made with formed structural steel, welded inside and out for added strength.

MODEL 81205
PAIR OF STANDS
5 TON CAPACITY
(Each stand)

INTENDED USE
Low profile design in order to support forklifts and heavy machinery. All stands are sold and intended to be used in pairs.

FEATURES Pin type support column adjusts to four different height positions. Heavy duty adjustment pin is secured to stand to prevent loss. Handle provides ease of positioning and carrying. 9" square base secures and stabilizes load.

MODEL 81208 PAIR OF STANDS LOW HEIGHT 10 TON CAPACITY (Each stand)

MODEL 81209 PAIR OF STANDS MEDIUM HEIGHT 10 TON CAPACITY (Each stand)

MODEL 81210 PAIR OF STANDS HIGH HEIGHT 10 TON CAPACITY (Each stand)

INTENDED USE
Fleet garages, agricultural and construction maintenance shops where a pin type height adjustment column is desired. All stands are sold and intended to be used in pairs.

FEATURES Pin type support column adjusts to multiple height positions. See specification chart. Adjustment pin is secured to stand to prevent loss. Four legged base made of heavy schedule 2" diameter pipe for added stability. Large support saddle with locating lugs position and center load. *Note: Models not shown have same basic construction as model pictured.

MODEL 81222
PAIR OF STANDS
22 TON CAPACITY
(Each stand)

INTENDED USE
Fleet and maintenance garages where low profile stands are used to support loaded trailers. All stands are sold and intended to be used in pairs.

FEATURES Pin type support column adjusts to four different height positions. Adjustment pin is secured to stand to prevent loss. Handle provides ease of positioning and carrying. 3/8" thick solid steel base plate for added stability.

MODEL 81004C PAIR OF STANDS 3 TON CAPACITY (Each stand)

MODEL 81006C PAIR OF STANDS 5 TON CAPACITY (Each stand)

INTENDED USE
For automotive use where vehicle is to be supported before making repairs.

FEATURES Heavy duty lift arms made with ball bearing conveyer rollers which allow easy rotation of wheels for alignment with bolt pattern. 7-1/2" of side to side lift arm adjustment eliminates the trial and error method of aligning the rim's lug holes with the wheel drum. A 1500 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation. The winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for constant hand pressure against the crank handle. A hydraulic jack tilts the lift arms in order to match the angle of the spindle. Safety chain provided to secure tires and wheels to the dolly. Maneuverability is made easy by means of two rear mounted ball bearing caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving. NOTE: All models have the same basic construction as the model pictured. All stands are sold and intended to be used in pairs.

MODEL 81007B PAIR OF STANDS 7 TON CAPACITY (Each stand)

MODEL 81010B PAIR OF STANDS 10 TON CAPACITY (Each stand)

INTENDED USE
Fleet garages, agricultural and construction maintenance shops.



Click here for dimensions