MODEL 82300B 1 TON CAPACITY

MODEL 82301B 1 TON CAPACITY

INTENDED USE
For the removal and installation of single, tandem and duplex tires and wheels.

FEATURES Rear swivel caster wheel and rigid front wheels provide positive steering for the model 82300B. Swivel caster wheels both fore and aft provide side to side maneuverability for the model 82302B. Wheels with polyurethane tread protect floor. Lift arms with ball bearing rollers easily rotate vehicle rim for bolt pattern alignment. Lift arms supported at both ends minimize wheel movement. Adjustable height push bar provides unobstructed access to hub area. 3-1/4" travel adjustment on rear caster wheel matches lifting arms with spindle angle.

MODEL 82303A
LIFT / TILT WHEEL DOLLY
1/2 TON CAPACITY

INTENDED USE
Same as the models 82300B and 82301B but with added tilt features.

FEATURES Patented tilt design positions wheel at 45 degree angle for easy wheel bearing installation and waste oil removal. Wheel inspection made easier at 45 degree tilt angle. Four 4" diameter swivel caster wheels for easy positioning.

MODEL 82302B 1/2 TON CAPACITY

INTENDED USE
For the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level.

FEATURES 7-1/2" of side-to-side lift arm adjustment eliminates the trial and error method of aligning the rim's lug holes with the wheel drum. Heavy duty lift arms made with ball bearing conveyor rollers which allow easy rotation of wheels for alignment with bolt pattern. A 1500 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation. The winch gear design acts as a brake and allow the load to be lowered incrementally if desired and without the need of constant hand pressure against the crank handle. A hydraulic jack tilts the lift arms in order to match the angle of the spindle. Maneuverability is made easy by means of two rear mounted ball bearing swivel caster wheels.

Click here for dimensions